Few Problems On Downloader USB AVR AVR mk II for codevision

Few Problems On Downloader USB AVR AVR mk II for codevision
When our laptop users who have a hobby of tinkering with microcontrollers we might prefer something more devices easy and convenient to fill in the program that we have made to the minimum system microcontroller AVR. So the USB downloader is a very precise and piihan probably already widely available on the market today.


But there sekikit problems arise later on, especially if we are already accustomed to playing microcontroller using C language that is the AVR CodeVision Versions 2.05 or below. Maybe if already accustomed to using assembly language or the AVR-GCC on the AVR Studio it will not be a problem.

If we buy a USB downloder that have been circulating on the market today that we will probably get is a downloader USB AVR AVRISP Mk II version is no longer STK 500 as the previous version. Obviously this will make a bit of a problem in AVR CodeVision users who need a device or a USB downloader. Because the USB downloader Mk II turns out to require a driver to be picked out of AVR Studio is by installing AVR Studio first. As we know now Atmel has been issued for the software that is up to version mikrokontrolernya Atmel Studio 6 which update previous versions AVR Studio 5. If I had previously used frequently using AVR USB downloader version 500 for CodeVision AVR STK no need to install AVR Studio since drivers already available alone.

It makes the problem when we want to fill in our program that have been created using AVR CodeVision and we took the drivers by installing the Atmel AVR Studio 5 or Studio 6. The problem that arises is when the charging program or flash microcontroller program to be "error", or even no response at the time of the flash program to the microcontroller. Yet when checked the settings on CodeVision AVR programmer Mk II driver already exists and is in the set, while in the "device manager" in the windows and installed also appeared normal. But when we try to re-flash program error still appears when we use codevision AVR, but when we try to use Atmel AVR Studio 5 or Studio 6 is no problem and perfectly normal.

After dizziness tried many times using AVR CodeVision might not ultimately be tried again check the settings and select the USB programmer Mk II there was a warning that turned out to require CodeVision AVR AVR Studio version 4:18 or earlier. Then I try to install AVR Studio version 4:19 because that which I still have on my laptop even though there Atmel Studio 6. After that I tried again using AVR CodeVision and tested in flash mode and it worked and success. Means I get to the conclusion that if we use CodeVision AVR and downloader software that we use is USB USB AVRISP Mk II, then we must first install AVR Studio version 4:19 or earlier to replenish the program or programs to flash AVR microcontroller via USB even on computers or laptop may be available or the Atmel AVR Studio 5 Studio 6.

Hopefully useful.